NOTICE

Forums are temporarily disabled while we are working on a new login procedure.

When migrating the old forums over to our new forums we were unable to retain the identity of the authors, so the old posts will show up as "anonymous". All NEW posts will show up credited to their authors. So please participate and share knowledge just as you have in the past.

You must log in if you are an existing user or register if you are a new user in order to contribute to the discussions.

Discussion Forums - The Hendrix Group
HomeHomeDiscussionsDiscussionsGeneral Corrosi...General Corrosi...316L Rusting316L Rusting
Previous
 
Next
New Post
12/4/2002 9:00 AM
 
I work for a Pharmaceutical company that will decontaminate its biofermentors with 0.78 Advance cleaning solution at 137 degrees Celsius. The Advance cleaning solution is about 39 % NaOH and there is a chelating agent present. After cleaning the top inside lid of the biofermentor is covered in a reddish rust or rust colored material. The biofermentor tank is 316L stainless steel and only the inside top lid is affected by this cleaning and is not in direct contact on a continues basis as is the rest of the tank which is submerged in the cleaning solution and experiences no rusting. Each time the rusting appears we send the fermentor lid out (the inside only) to be electro-polished. This has happened each time we clean the fermentor. We seem to be losing passivation of the 316L Can you please help us determine what might be causing the rusting?
 
New Post
12/4/2002 9:00 AM
 
Robert: Yours is a tough question to answer in the context of a discussion forum, as the available information is not sufficient to provide you with a proper course of action. Please feel free to call and we can discuss. David Hendrix The Hendrix Group Inc.
 
New Post
12/5/2002 9:00 AM
 
Mr. Hendrix, here is the same message with additional information: I work for a Pharmaceutical company that will decontaminate its biofermentors with 0.78 Advance cleaning solution at 137 degrees Celsius. The Advance cleaning solution is about 39 % NaOH and there is a chelating agent present. After cleaning the top inside lid of the biofermentor is covered in a reddish rust or rust colored material. The biofermentor tank is 316L stainless steel and only the inside top lid is affected by this cleaning and is not in direct contact on a continues basis as is the rest of the tank which is submerged in the cleaning solution and experiences no rusting. Each time the rusting appears we send the fermentor lid out (the inside only) to be electro-polished. This has happened each time we clean the fermentor. Connected to the inside of the lid is a shaft that is about 3 feet long through which plant steam is used to heat the system (cleaning solution). The first 3/4' head of the shaft is a wider in diameter then the rest of the shaft. The head of the shaft is really two pieces held together with 316L bolts but the joint is a Tungsten and Graphite interface and it is at the interface that there seems to be depositing of rust on the rest of the inside lid. We seem to be losing passivation of the 316L Can you please help us determine what might be causing the rusting? Is there some kind of Galvanic corrosion happening between the 316L and Tungsten?
 
New Post
12/15/2002 9:00 AM
 
Dear Sir: Have you had any testing conducted of the "rust" material to identify the corrosion product or sampled the head of the vessel? That information would help. Typically, vapor space corrosion can be more severe than liquid corrosion based on the concentration of he corrosive. High concentration caustic could be corrosive to 316SS at the elevated temperatureas stated in you post. David Hendrix The Hendrix Group Inc.
 
Previous
 
Next
HomeHomeDiscussionsDiscussionsGeneral Corrosi...General Corrosi...316L Rusting316L Rusting


  

News

With a little delay, our Calculation of Ammonium Salt Deposition Temperatures...read more
Our sulfidic corrosion calculators are now available at hghouston.com/calcula...read more

Stay Current

Sign up for our quarterly newsletter

covering updates on corrosion

Sign Up