NOTICE

Forums are temporarily disabled while we are working on a new login procedure.

When migrating the old forums over to our new forums we were unable to retain the identity of the authors, so the old posts will show up as "anonymous". All NEW posts will show up credited to their authors. So please participate and share knowledge just as you have in the past.

You must log in if you are an existing user or register if you are a new user in order to contribute to the discussions.

Discussion Forums - The Hendrix Group
HomeHomeDiscussionsDiscussionsGeneral Corrosi...General Corrosi...Corrosion control in RefineryCorrosion control in Refinery
Previous
 
Next
New Post
8/7/2007 9:00 AM
 
User is offline 
No Ranking

Joined: 1/1/0001
Posts: 0
Dear members, We are planning to implement on-line corrosion monitoring in a typical refinery complex consisting of CDU, VDU, FCCU, HYDROCRACKER AMINE UNIT SULPHUR RECOVERY UNIT SOUR WATER STRIPPING UNIT etc I need the members experience using either ER/LPR probes connecting to DCS for continuous monitoring.And i will be glad to know that what are the critical circuits in each of the above unit where these probes can be installed and monitored successfully.You can also the mail the details to sriramchandra@rediffmail.com with advance thanks,
 
New Post
8/9/2007 9:00 AM
 
User is offline 
No Ranking

Joined: 1/1/0001
Posts: 0
Krish Corrosion monitoring (On-stream) may vary widely from unit sections in an operating refinery. You will get some useful information from: Corrosion source.com 2000 Session 01 Paper 0103 -an article on " Trouble shooting Critical Process problems in Oil & Gas Production & Refining using Real Time Monitoring Methods: by D Balleau & D.A. Eden & D.C Eden. You will also get useful information from www.refiningonline.com/orgRefinery.asp Trust this will be of some help for your implementation C.V.Srinivasan Nishi Engineers Pvt Ltd India August 10,2007 E-mail: nishi@vsnl.com >Dear members, >We are planning to implement on-line corrosion monitoring in >a typical refinery complex consisting of >CDU, >VDU, >FCCU, >HYDROCRACKER >AMINE UNIT >SULPHUR RECOVERY UNIT >SOUR WATER STRIPPING UNIT etc > >I need the members experience using either ER/LPR probes >connecting to DCS for continuous monitoring.And i will be >glad to know that what are the critical circuits in each of >the above unit where these probes can be installed and >monitored successfully.You can also the mail the details to > >sriramchandra@rediffmail.com > >with advance thanks,
 
 Page 1 of 1
Previous
 
Next
HomeHomeDiscussionsDiscussionsGeneral Corrosi...General Corrosi...Corrosion control in RefineryCorrosion control in Refinery


  

News

NEW! Calculation of Ammonium Salt Deposition Temperatures
With a little delay, our Calculation of Ammonium Salt Deposition Temperatures...read more
Sulfidic corrosion calculators NOW AVAILABLE
Our sulfidic corrosion calculators are now available at hghouston.com/calcula...read more

Stay Current

Sign up for our quarterly newsletter

covering updates on corrosion

Sign Up