NOTICE

Forums are temporarily disabled while we are working on a new login procedure.

When migrating the old forums over to our new forums we were unable to retain the identity of the authors, so the old posts will show up as "anonymous". All NEW posts will show up credited to their authors. So please participate and share knowledge just as you have in the past.

You must log in if you are an existing user or register if you are a new user in order to contribute to the discussions.

Discussion Forums - The Hendrix Group
HomeHomeDiscussionsDiscussionsGeneral Corrosi...General Corrosi...Pinhole leaks on stainless domestic water supplyPinhole leaks on stainless domestic water supply
Previous
 
Next
New Post
7/21/2004 9:00 AM
 
I have a problem with pinhole leaks on a 6 inch domestic water supply line. The piping is welded stainless, the holes are developing on the upstream side of the weld, about 3/4 of an inch from the weld. The piping has only been in use for about 18 months. The water supply going through the line is softened city water (nothing else). Any assistance will be appreciated. Can you provide some direction?
 
New Post
7/24/2004 9:00 AM
 
Mike: Tough to say with your limited description of the water chemistry. However, you should investigate the usual suspects, i.e., deposits, chlorides, residual chloride and SRB's. Hope this helps! David Hendrix The Hendrix Group Inc.
 
New Post
7/25/2004 9:00 AM
 
Thank you for the info. I will get you an update on our findings.
 
New Post
9/3/2004 9:00 AM
 
Sounds like the pipe may not have been passivated. The heat affected zone right next to the weld is the weakest part of the pipe and most prone to corrosion. If there was not passivation after welding you could see the kind of result you describe. Any corrosion that occurs in that zone can quickly accelerate into a pinhole.
 
Previous
 
Next
HomeHomeDiscussionsDiscussionsGeneral Corrosi...General Corrosi...Pinhole leaks on stainless domestic water supplyPinhole leaks on stainless domestic water supply


  

News

With a little delay, our Calculation of Ammonium Salt Deposition Temperatures...read more
Our sulfidic corrosion calculators are now available at hghouston.com/calcula...read more

Stay Current

Sign up for our quarterly newsletter

covering updates on corrosion

Sign Up